Search results for: 'gate fail box'

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

RIA013 - Gearmotor Box

FROG-PC Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

88001-0157 - Accessory Box

RIA009 - Foundation Box Cover

RIA029 - Foundation Box/Cover

88001-0155 - Accessory Box

RIA022 - Foundation Box Screw Pack

RID100 - Gearmotor Box for A3000

88001-0156 - Accessory Box AXO5/7

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

Complete kit for a single swing gate weighing up to 400 kg / max width 3.5m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

FROGAE-P  Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

CAME Connect	European Standards	Encoder Motor

Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Control panel for double leaf gates, for motors with integral encoder and electro lock. The motors have motor terminals MNE. 

Click here to view ZL92 manual