Search results for: 'vd955 min lock81 kit pull only'

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

LOCK81 Single cylinder electric lock

Pull-cord release and resetting device to fit on door handle. L = 3 m

100m drum of single core rubber loop cable for use with: VD907, VD906, VD955 detectors

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Deluxe Gard GT8 barrier kit for road widths of up to 8m.  Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Heater kit with thermostat.

Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT4 barrier kit for road widths of up to 4m. Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

MTM VR ZAMAK GSM Audio Vandal resistant GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard GSM Audio GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

VRW GSM Audio GSM Kit, surface or flush mounting, with or without keypad, with or without proximity reading. 

MTM Standard with Agata Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

Complete kit for a single swing gate weighing up to 200 kg / max width 1.8 m

CAME Connect	European Standards

Control card kit for operating during power outages and for recharging batteries, with battery housing

MTM VR ZAMAK Vandal Resistant, Audio Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

FAST70-S  Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 400 kg / max width 10 m

CAME Connect	European Standards

FAST70-P  Complete kit for a pair of swing gates weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards