Search results for: 'style m b b b bs aticulated arm'

Sensitive safety edge made of rubber, with mechanical contact.L = 1,500 mm.

Sensitive safety edge made of rubber, with mechanical contact.L = 1,700 mm.

Sensitive safety edge made of rubber, with mechanical contact.L = 2,000 mm.

Sensitive safety edge made of rubber, with mechanical contact.L = 2,500 mm.

Circuit board for self-diagnosing the electrical connections, 12 - 24 V AC – DC.

Remote control featured by an elegant and refined design 433Mhz

Remote control featured by an elegant and refined design 433/868Mhz

ZLX24SA - Multifunctional control panel, with 230 V AC power supply, for 24 V double-leaf gates, with programming and graphical signaling display, self-diagnosis of safety devices, Adaptive Speed & Torque Technology, CXN BUS, 4 safety inputs and storage for up to 1000 users.

CAME Connect	European Standards	Encoder Motor

ZL60 Control panel for one or two leaf swing gates with dip switch settings, built-in radio remote programming and self-diagnosis of the safety devices.

CAME Connect	European Standards	Encoder Motor

ZL65 Control panel for one or two-leaf swing gates, with programming display, self-diagnosing safety devices and on-board radio decoding.

CAME Connect	European Standards	Encoder Motor

Two-channel 868.35 MHz surface-mounted IP54 12 - 24 V AC - DC receiver for storing up to 50 different users (codes), with TOP, TAM, ATOMO D and TTS coding.

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Replacement control panel for legacy barriers GARD4 and GARD6.  ZL39B uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.

Replacement control panel for legacy barriers G4000 and G6000.  ZL37 uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.

Click here to view the ZL37F manual

Cordless, surface-mounted bi-directional, infrared beam modules, with single contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

Cordless, surface-mounted bi-directional, infrared beam modules, with double contact output and built-in receiver. External battery-powered transmitter.Range: 10 m.

Pair of surface-mounted cordless photocells, with mono-directional infrared beam, made up of: one receiver + one battery-operated transmitter. Range: 10 m.

DELTA-E Pair of surface-mounted 12 – 24 V AC – DC photocells with casing.Range 20 m. ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement