Search results for: '【Tg:EAtradingSignals】-The Swing Trading Strategy Guide for 2024 - Admiral Markets'

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

ZL60 Control panel for one or two leaf swing gates with dip switch settings, built-in radio remote programming and self-diagnosis of the safety devices.

CAME Connect	European Standards	Encoder Motor

ZL65 Control panel for one or two-leaf swing gates, with programming display, self-diagnosing safety devices and on-board radio decoding.

CAME Connect	European Standards	Encoder Motor

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

TOP44FGN is a fixed code remote with four buttons transmitting on 433MHz. Note the black ring around the black buttons; any other coloured ring is not compatible. It not a style thing! Each button can be have a code cloned onto it by a compatible remote. 

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

DOC-E Surface fitting safety photocells 20m range ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement

DOC-I Flush fitting safety or free exit photocells 20m range. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

Control panel for double leaf gates, for motors with integral encoder and electro lock. The motors have motor terminals MNE. 

Click here to view ZL92 manual

Circuit board for self-diagnosing the electrical connections, 12 - 24 V AC – DC.

ZLJ24 Multifunction control panel for swing gates with two leaves, graphic alerts display, self-diagnosing safety devices and on-board radio decoding.

CAME Connect	European Standards	Encoder Motor

ZA3P Multifunction control panel for two-leaved swing gates, with limit-switch control and slow-down speed adjusting.

CAME Connect	European Standards

Replacement control panel for legacy barriers G4000 and G6000.  ZL37 uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.

Click here to view the ZL37F manual

ZA4 PCB Replacement PCB for a ZA4 Control Panel

CAME Connect	European Standards

DELTA-I Pair of 12 – 24 V AC – DC recess-mounted photocells with casing. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

DELTA-E Pair of surface-mounted 12 – 24 V AC – DC photocells with casing.Range 20 m. ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement

Replacement control panel for legacy barriers GARD4 and GARD6.  ZL39B uses slow down microswitches. The later ZL392 uses an encoder input. Barrier arm speed is selected by moving transformer taps.