Search results for: '100 into purata pergerakan unit setting slave lengkap'

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

CGZ6 - Galvanized rack module 6 in 30 x 30 laminated steel, 1m

LOCK81 Single cylinder electric lock

LOCK82 Double cylinder electric lock

A4364 Release device with lever key

A4365 Release device with trilobe key

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

Control card kit for operating during power outages and for recharging batteries, with battery housing

Pull-cord release and resetting device to fit on door handle. L = 3 m

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

A4370 Drive lever for openings of up to 140° and gate leaves of max. 2 m in length.

White painted aluminum 90 x 60 mm, complete with internal reinforcement, hollow cover profiles and shockproof rubber profile. Length: 4220 mm.

Drive arm for sectional doors with the distance between the upper edge of the door and the shaft-spring assembly between 300 and 600 mm

RIR090 - Transformer For BX ZA3 ZA4 ZA5 ZC5 ZF1 ZM2

A4366 Release device with customized key and EURO-DIN cylinder

Antenna tuned at 433.92 MHz.

Antenna tuned at 868.35 MHz.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

ATS-S324   Complete kit for a swing gate weighing up to 400 kg per leaf / max width 3 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards