Search results for: '100 into white is channel case pattern'

Pull-cord release and resetting device to fit on door handle. L = 3 m

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

A4370 Drive lever for openings of up to 140° and gate leaves of max. 2 m in length.

Drive arm for sectional doors with the distance between the upper edge of the door and the shaft-spring assembly between 300 and 600 mm

RIR090 - Transformer For BX ZA3 ZA4 ZA5 ZC5 ZF1 ZM2

A4366 Release device with customized key and EURO-DIN cylinder

Antenna tuned at 433.92 MHz.

Antenna tuned at 868.35 MHz.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FROG-PC Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FL180 Chain driven transmission lever for openings of up to 180° and gate leaves of max. 2 m in length.

Folding drive arm

Straight drive arm and track with mechanical opening limit-switch.

Antenna tuned at 433.92 MHz.

Antenna tuned at 868.35 MHz.

433,92 MHz plug-in radio frequency card.

868.35 MHz plug-in radio frequency card.

Recessed key switch with blue backlight and DIN lock cylinder.