Search results for: 'key pad'

Control card kit for operating during power outages and for recharging batteries, with battery housing

Pull-cord release and resetting device to fit on door handle. L = 3 m

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

A4370 Drive lever for openings of up to 140° and gate leaves of max. 2 m in length.

White painted aluminum 90 x 60 mm, complete with internal reinforcement, hollow cover profiles and shockproof rubber profile. Length: 4220 mm.

Drive arm for sectional doors with the distance between the upper edge of the door and the shaft-spring assembly between 300 and 600 mm

RIR090 - Transformer For BX ZA3 ZA4 ZA5 ZC5 ZF1 ZM2

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

FROG-PC Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening

Stand-alone GSM Gateway module for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included)

FL180 Chain driven transmission lever for openings of up to 180° and gate leaves of max. 2 m in length.

A.G64   call activation relay on GSM network

GSM Gateway module with built-in radio, for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

Adapter arm for partially protruding overhead garage doors

VD909L   Mini-loop exit sensor

Slimline version of 'Dynamite' vehicle sensors with 3 sensitivity adjustments.

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay