Search results for: 'tg:sally530 hot long dc it taxabl for xm withdrawal'

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

TOP44FGN is a fixed code remote with four buttons transmitting on 433MHz. Note the black ring around the black buttons; any other coloured ring is not compatible. It not a style thing! Each button can be have a code cloned onto it by a compatible remote. 

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

Barrier arm for G6000 cabinets, white 100mm diameter. This arm fits the G0605 arm clamp. The G0461 reflective strips are recommended.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Two way sprung loaded keyswitch. High security euro-cylinder. 

Used for hold to run applications such as roller shutter opening and closing. Hold to run is also required for automation where safety is critical, and the operator is required to to have visual contact with the risk zone.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

Automatic barrier kit using the legacy barrier cabinet on openings up to 5m. The cabinet includes a 24Vdc gearmotor with encoder.  The cabinet is galvanised steel in a grey finish. The set comes with a tubular arm with tip support post and reflective strips. Specify left or right hand.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

RIA013 - Gearmotor Box

RIA014 - Lower Flange

RIA015 - Slow Shaft

RIA016 - End Screw

RIA046 - Transmission Lever

RIA083 - Encoder Magnet

RIA084 - Encoder Device