Search results for: '【Tg:EAtradingSignals】-Top 10 Forex Trading Tips For Beginners.Pdf - Academia.edu'

RIR090 - Transformer For BX ZA3 ZA4 ZA5 ZC5 ZF1 ZM2

Auxiliary contacts unit for detecting the boom position

RIA063 - Motor Unit For FROG-AL

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

CAME Connect	European Standards

FL180 Chain driven transmission lever for openings of up to 180° and gate leaves of max. 2 m in length.

Modbus TCP/RTU bridge for integration with third party systems.

Inner reinforcement for semi-oval section barrier; indispensable for gross clearances exceeding 2.5 m.

Red/green LED strips for booms up to 4-m long

Fastening flange for semi-oval section boom.

Control board for decoding and access-control management via keypad selectors. R800 plugs into recent control panels.

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Ethernet-WiFi Gateway for controlling, via the CAME Connect system, up to five 806SA-0040 modules over the radio-frequency connection.

Pair of surface mounted synchronized, swiveling, infrared-beam photocells rated at 12 - 24 V AC - DC and battery transmitter. Range: 10 m.

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Irreversible 230 V gearmotor with encoder for swing gates with up to 3 m leaves that weighs up to 500 kg.

CAME Connect	European Standards	Encoder Motor