Search results for: 'note and shell 5m frog-a selector steel 5 pcb'

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

CGZ Module 4 rack made of 22 x 22 mm galvanized steel, 1m

CGZS Module 4 rack made of 30 x 8 mm galvanized steel with fastening holes and distancers, 1m

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

RIA059 - FROG-A24 Magnetic Switch

Control board for decoding and access-control management via keypad selectors. R800 plugs into recent control panels.

A.R22   Vehicle ID receiver

RIA088 - Motor Unit - FROG-A24E/A24

RIA058 - FROG-A24 Limit Switch Support

RIA063 - Motor Unit For FROG-AL

FROG-PM6  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 7 m leaves that weighs up to 550kg.

CAME Connect	European Standards	Encoder Motor

FROG-PM4  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 5.5m leaves that weighs up to 700kg.

CAME Connect	European Standards	Encoder Motor

RIA062 - Motor Unit For FROG-AV

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

TOP44FGN is a fixed code remote with four buttons transmitting on 433MHz. Note the black ring around the black buttons; any other coloured ring is not compatible. It not a style thing! Each button can be have a code cloned onto it by a compatible remote. 

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable.