Search results for: 'tg:echokrys0 fxblue tabs cover manual'

FTL-P   Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Oval section barrier arm in white aluminum alloy. This version does not have the yellow bump strip. The arm has side grooves with a cover strip for the optional lighting pipe. Arm length is 4 m for a 3.75m opening.

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a single swing gate weighing up to 200 kg / max width 1.8 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 1.8 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 400 kg / max width 10 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 400 kg / max width 14 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 600 kg / max width 18 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 800 kg / max width 20 m

CAME Connect	European Standards

Control panel for double leaf gates, for motors with integral encoder and electro lock. The motors have motor terminals MNE. 

Click here to view ZL92 manual

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

The SEL-B communicates with your phone using Wifi. Download the AUTOMATION BT app and operate the gate from your phone. If enabled, your phone can open the gate automaically when it is in range.

The SEL-B takes a multicore cable. Power is 12 or 24V ac/dc. The package is IP54 .     Click to view Bluetooth Selector Manual

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

868.35 MHz plug-in radio frequency card.