Search results for: 'tg:sally530 10 base for track singl telegram grei'

FROGAE-S  Complete kit for a single swing gate weighing up to 400 kg / max width 3.5m

CAME Connect	European Standards	Encoder Motor

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

100m drum of single core rubber loop cable for use with: VD907, VD906, VD955 detectors

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Automatic barrier kit using the legacy barrier cabinet on openings up to 5m. The cabinet includes a 24Vdc gearmotor with encoder.  The cabinet is galvanised steel in a grey finish. The set comes with a tubular arm with tip support post and reflective strips. Specify left or right hand.

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

CAME Connect	European Standards

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

Complete kit for a sliding gate weighing up to 400 kg / max width 14 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 600 kg / max width 18 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 800 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

CAME Connect	European Standards

Pair of surface mounted synchronized, swiveling, infrared-beam photocells rated at 12 - 24 V AC - DC and battery transmitter. Range: 10 m.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Locking magnet brackets allow two flush surfaces in shear to be locked together by ofsetting the magnet or the armature plate. The brackets are aluminium. The Z bracket is 2 part with ant-slip teeth that is bolted together. The L bracket is a single piece.

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

VY280t   Locking doo magnet with timer

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

CAME Connect	European Standards

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay