Search results for: '5818 into base free track singl for 230v fxleaders'

KR310S - Left Handed 230 V gearmotor with limithc switches for swing gates up to 3m leaves that weighs up to 400 kg. 

CAME Connect	European Standards

Operator with 230 V motor, featuring a control board with programming display, on-board radio decoding and mechanical limit-switches for sliding gates weighing up to 1,200 kg that are up to 20-m long.

CAME Connect	European Standards

FAST70-P  Complete kit for a pair of swing gates weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards

100m drum of single core rubber loop cable for use with: VD907, VD906, VD955 detectors

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards

FROG-A Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 3.5 m leaves that weighs up to 400 kg.

CAME Connect	European Standards

FROG-AE Irreversible underground 230 V gearmotor with encoder, adjustable leaf-closing for swing gates with up to 3.5 m leaves that weighs up to 400 kg.

CAME Connect	European Standards

FROG-PM6  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 7 m leaves that weighs up to 550kg.

CAME Connect	European Standards	Encoder Motor

FROG-PM4  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 5.5m leaves that weighs up to 700kg.

CAME Connect	European Standards	Encoder Motor

FROG-AV Irreversible underground 230 V gearmotor, rapid version, with adjustable leaf-closing for swing gates with up to 1.3 m leaves that weighs up to 300 kg.

CAME Connect	European Standards	Encoder Motor

FROGAE-P  Complete kit for a pair of swing gates weighing up to 400 kg / max width 3.5m

CAME Connect	European Standards	Encoder Motor

DOC-I Flush fitting safety or free exit photocells 20m range. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

The VD.CI is designed to accept a plug-in vehicle detector on one side and accept the appropriate wires through the terminal block on the other. This device is designed for detectors that have a solid state output but need a single relay output.

For use with: VD940, VD955, VD913

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

FTL-P   Complete kit for a pair of swing gates weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.

Perla is the hands-free wall-mounting intercom, characterized by the central blue backlit ring nut that allows to activate the many functions available.