Search results for: 'delet photobeam arm each to diagnos'

Two-channel 433.92 MHz standalone receiver. Housing is IP54 (internal). 12 to 24 V ac/dc. Stores up to 50 remotes. Compatible with TOP, TAM, ATOMO D, TWIN and TTS coding.

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

FAST70-S  Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

CAME Connect	European Standards

Irreversible 24 V gearmotor, with hinged transmission arm and C Max. 380 mm for swing gates with up to 4 m leaves that weighs up to 400 kg.

CAME Connect	European Standards

FA7024 Irreversible 24 V gearmotor with hinged transmission arm and C Max. 200 mm for swing gates with with up to 2.3 m leaves that weighs up to 200 kg

CAME Connect	European Standards	Encoder Motor

FA70230 Irreversible 230 V gearmotor with hinged transmission arm and C Max. 200 mm for swing gates with with up to 2.3 m leaves that weighs up to 200 kg.

CAME Connect	European Standards

Irreversible 24 V gearmotor, rapid version, with hinged transmission arm and C Max. 380 mm for swing gates with up to 4 m leaves that weighs up to 400 kg.

CAME Connect	European Standards

Irreversible 230 V gearmotor, rapid version, with hinged transmission arm and C Max. 380 mm for swing gates with with up to 4 m leaves that weighs up to 400 kg.

CAME Connect	European Standards

FTX20DLS - 801MB-0120 Irreversible 24 V gearmotor with hinged transmission-arm with C Max. 250 mm for swing gates with up to 2 m leaves that weighs up to 200 kg

CAME Connect	European Standards	Encoder Motor

FA70230CB Irreversible 230 V gearmotor featuring a control board with functions display, on-board radio decoding and hinged transmission arm with C Max. 200 mm for swing gates with with up to 2.3 m leaves that weighs up to 200 kg.

CAME Connect	European Standards

FA7024CB Irreversible 24 V gearmotor featuring a control board with functions display, on-board radio decoding and hinged transmission arm with C Max. 200 mm for swing gates with with up to 2.3 m leaves that weighs up to 200 kg.

CAME Connect	European Standards	Encoder Motor

FTX20DLC - 801MB-0110 Irreversible 24 V gearmotor featuring a control board with functions display, on-board radio decoding and hinged transmission arm with C Max. 250 mm for swing gates with up to 2 m leaves that weighs up to 200 kg

CAME Connect	European Standards	Encoder Motor

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT4 barrier kit for road widths of up to 4m. Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

Deluxe Gard GT8 barrier kit for road widths of up to 8m.  Feature rich GT8 barrier kit for road widths of up to 6m. There are two GT barrier frame sizes. GT4 covers roadways up to 5m with an oval arm. GT8 covers roads up to 7.6m with a one or two part hexagonal arm. Feature rich sets include arm and cabinet lights.

CAME Connect	European Standards

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

FA.T80   CoBRA programmable beam

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

Automatic barrier kit using the legacy barrier cabinet on openings up to 5m. The cabinet includes a 24Vdc gearmotor with encoder.  The cabinet is galvanised steel in a grey finish. The set comes with a tubular arm with tip support post and reflective strips. Specify left or right hand.