Search results for: 'youvky9p or 10 selector 10 frog-a a pg_sleep 15'

Pair of surface mounted synchronized, swiveling, infrared-beam photocells rated at 12 - 24 V AC - DC and battery transmitter. Range: 10 m.

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

RIA042 - Release Hooking Lever

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

The VD907 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

The VD906 vehicle loop detector allows "free passage" of vehicles passing overhead. These units are an installer favourite due to their small size and being self setting it's easy to install.

RIY077 is a tri-lobe manual release key. It is used to open most Came sliding gate motor manual release covers. Once inside the sliding gate release compartment, there is a yellow knob to turn.  It also fits the manual release mechanism on Came FROG underground motor systems fitted with the A4365 release. These keys are sold singly, or in a box of ten. 

ZBX7N PCB Replacement PCB

CAME Connect	European Standards	Encoder Motor

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

FTX-S   Complete kit for a single swing gate weighing up to 200 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

Complete kit for a sliding gate weighing up to 1000 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 1500 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 2000 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 2500 kg / max width 20 m

CAME Connect	European Standards

Complete kit for a single swing gate weighing up to 100 kg / max width 1.8 m

CAME Connect	European Standards

Complete kit for a single swing gate weighing up to 100 kg / max width 1.8 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

CAME Connect	European Standards

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

CAME Connect	European Standards

Complete kit for a sliding gate weighing up to 3500 kg / max width 17 m

Three-Phase	European Standards

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual