Search results for: 'digit lever controller'

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 4 m

CAME Connect	Encoder Motor	European Standards

Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 7 m

CAME Connect	Encoder Motor	European Standards

AXL-P   Complete kit for a pair of swing gates weighing up to 250 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

AXI25DG-P Complete kit for a pair of swing gates weighing up to 300 kg per leaf / max width 2.5 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

AXI25DG-S Complete kit for a single swing gate weighing up to 300 kg per leaf / max width 2.5 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

GSM Gateway module with built-in radio, for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

Keypad with 12 keys for code entry.  The codes are held in the compatible controller. Connection is made on a 2 core cable to the controller.

Click to view SELT1 manual

The SEL-B communicates with your phone using Wifi. Download the AUTOMATION BT app and operate the gate from your phone. If enabled, your phone can open the gate automaically when it is in range.

The SEL-B takes a multicore cable. Power is 12 or 24V ac/dc. The package is IP54 .     Click to view Bluetooth Selector Manual

Stand-alone GSM Gateway module for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included)

Operator with 24 V motor, featuring a control board with display on-board radio decoding, movement and obstruction detection control for sliding gates weighing up to 400 kg that are up to 14-m long.

CAME Connect	European Standards

Operator with 24 V motor, featuring a control board with display, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 600 kg that are up to 18-m long.

CAME Connect	European Standards

Operator with 24 V motor, featuring a control board with dip-switch settings, on-board radio decoding, movement and obstruction-detection control for sliding gates weighing up to 400 kg that are up to 10-m long

CAME Connect	European Standards

Remote control featured by an elegant and refined design 433Mhz

Remote control featured by an elegant and refined design 433/868Mhz

Ethernet Gateway module with built-in radio, with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

Ethernet-WiFi Gateway for controlling, via the CAME Connect system, up to five 806SA-0040 modules over the radio-frequency connection.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards