Search results for: 'gate board fuse'

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

ZL60 Control panel for one or two leaf swing gates with dip switch settings, built-in radio remote programming and self-diagnosis of the safety devices.

CAME Connect	European Standards	Encoder Motor

RLB Circuit board for emergency operation and battery charging. (For ZL60/ZL65)

FROG-CFNI Foundation box made of AISI 304 steel, with release latching lever, gate fastening brace and screw for adjusting the opening limit point.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

RIA043 - Gate Hooking Bracket

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Operator with encoder, featuring a control board with segmented graphic display, for sectional and overhead garage doors.

Encoder Motor	European Standards

Intercom modules for GSM systems.Electronic module with techno-polymer body and 2 call buttons with double, blue or white, namecard backlighting. Slot for on-board micro SIM (micro SIM not included). It can manage up to 1000 telephone numbers and remotely opens the gateway via a telephone ring.

VY500f   Waterproof gate locking magnet

LB90 is an interface circuit board to connect two batteries to a ZL90 and ZL92 control panels. The LB90 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB90 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Click here to view LB90 manual

Click here to view LB180 manual

FROGAE-S  Complete kit for a single swing gate weighing up to 400 kg / max width 3.5m

CAME Connect	European Standards	Encoder Motor

Circuit board for self-diagnosing the electrical connections, 12 - 24 V AC – DC.

VY350w    Waterproof locking gate magnet

119RIA047 is the manual release handle used on Came underground gate systems that have the A4364 fitted. This is the low security release mechanism. The release handle can be inserted at the base of the gate from either side of the gate. When inserted, turn the handle by about 120 degrees. When unlocked, the gate is disengaged from the underground drive.

A4370 Drive lever for openings of up to 140° and gate leaves of max. 2 m in length.

FL180 Chain driven transmission lever for openings of up to 180° and gate leaves of max. 2 m in length.

FROG-CFN Foundation box in steel with cataphoresis treatment, complete with unlocking lever, fixing bracket to the gate and screw for adjusting the limit switch point in opening