Search results for: 'stylo-m m m m m bs fixing drive arm'

Plus version operator with 36 V motor, featuring a control board with graphic display, Adaptive Speed & Torque Technology, 4 safety inputs, magnetic limit switches and clock accessory included for sliding gates weighing up to 2000 kg that are up to 20-m long.

CAME Connect	European Standards

Inner reinforcement for semi-oval section barrier; indispensable for gross clearances exceeding 2.5 m.

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 30 m

Operator with 230 V motor, featuring a control board with programming display, on-board radio decoding, movement and obstruction detecting device and mechanical limit-switches for sliding gates weighing up to 800 kg that are up to 14-m long

CAME Connect	European Standards

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 20 m

Plus version operator with 36 V motor, featuring a control board with graphic display, Adaptive Speed & Torque Technology, 4 safety inputs, module 6 pinion, magnetic limit switches and clock accessory included for sliding gates weighing up to 2500 kg that are up to 20-m long.

CAME Connect	European Standards

Barrier arm for G4000 cabinets, white 60mm diameter. Fits the G0405 arm clamp. The G0461 reflective strips are recommended.

Semi-oval section barrier arm in white aluminum alloy.  A yellow rubber bump strip is fitted in a groove under the arm. Arm length is 4m for 3.75m opening.

Remote control featured by an elegant and refined design 433Mhz

G4000 are issued with the arm clamp for a rectangular arm. This G0405 is required for fitting a 60mm diameter tubular arm.

G6000 are issued with the arm clamp for a rectangular arm. This G0605 is required for fitting a 100mm diameter tubular arm.

Barrier arm for G4000 cabinets, white 60x40mm. There are slots in each corner to take the red rubber strip part G0403. The G0461 reflective strips are recommended.

Adapter arm for partially protruding overhead garage doors

88003-0085 - Spring Attachment Arm GT4

Barrier arm for G6000 cabinets, white 100mm diameter. This arm fits the G0605 arm clamp. The G0461 reflective strips are recommended.

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.