Search results for: '100 inch gate funded trailer'

Intercom video modules for X1 systems.Electronic module with techno-polymer body and 2 call buttons with double, blue or white, namecard backlighting. PAL/NTSC video camera sensor with 680x512 pixel resolution and built-in microprocessor for digital signal processing. Wide-eye lens with 100° horizontal and 82° vertical opening and digital zoom adjustment. 

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

MTM Standard with Perla Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard GSM Audio GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with Agata Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM VR ZAMAK GSM Audio Vandal resistant GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

VRW GSM Audio GSM Kit, surface or flush mounting, with or without keypad, with or without proximity reading. 

MTM VR ZAMAK Vandal Resistant, Audio Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with Opale Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with XTS7 Monitor IP Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

Stand-alone GSM Gateway module for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included)

GSM Gateway module with built-in radio, for remote control of CAME automated operators with the CAME CONNECT dedicated system (002RSE module included). For controlling up to five slave modules.

VY808s    Waterproof exit button

VY808t    Wireless waterproof exit button

VY808i    Waterproof illuminated exit button

VY808k    Waterproof rotary keyswitch