Search results for: 'tg:rebate56 is tradingview gate for dry termin reducer'

FROG-AV Irreversible underground 230 V gearmotor, rapid version, with adjustable leaf-closing for swing gates with up to 1.3 m leaves that weighs up to 300 kg.

CAME Connect	European Standards	Encoder Motor

Straight drive arm and track with mechanical opening limit-switch.

A.G64   call activation relay on GSM network

Click "Customize" to view all spare part for these products. For additional help, please contact 01491 680500

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

ZLX24SA - Multifunctional control panel, with 230 V AC power supply, for 24 V double-leaf gates, with programming and graphical signaling display, self-diagnosis of safety devices, Adaptive Speed & Torque Technology, CXN BUS, 4 safety inputs and storage for up to 1000 users.

CAME Connect	European Standards	Encoder Motor

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Make sure you choose the correct number of casements and manual releases so it matches the number of motors that you need.

Use this tool to build a FROG kit of your choice:

-Motor and Control Panel. The panels match the chosen motor.

-Manual release type. Choose from lever, trilobe or custom key.

-Remotes. Choose between 2 button and 4 button, fixed or rolling code.

-Foundation casing. 

-Photocells. 

-Choose whether you need a radio card and/or antenna.

ATS-S3   Complete kit for a single swing gate weighing up to 400 kg per leaf / max width 3 m

CAME Connect	European Standards

ATS-S5   Complete kit for a single swing gate weighing up to 400 kg per leaf / max width 5 m

CAME Connect	European Standards

ATS-P3   Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 3 m

CAME Connect	European Standards

ATS-P5   Complete kit for a pair of swing gates weighing up to 400 kg per leaf / max width 5 m

CAME Connect	European Standards

FAST70-P24   Complete kit for a pair of swing gates weighing up to 200 kg / max width 2.3 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

FAST70-S24   Complete kit for a single swing gate weighing up to 200 kg / max width 2.3 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

AXL-P   Complete kit for a pair of swing gates weighing up to 250 kg per leaf / max width 2 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

AXI25DG-S Complete kit for a single swing gate weighing up to 300 kg per leaf / max width 2.5 m

Intensive Duty	CAME Connect	European Standards	Encoder Motor

The VD959 'Dynamite' Adjustable vehicle loop detector is an absolute favorite for an EXIT sensor / Loop detector that requires no loops to be cut and is self setting, so takes a quarter of the time to install than the traditional loop detectors.

VD909   Mini-loop exit sensor

'Dynamite' vehicle sensors are the market leading detectors. No loops to cut. Self setting. The no brainer alternative to traditional exit loops.

Complete kit for a single swing gate weighing up to 400 kg / max width 5 m

CAME Connect	Encoder Motor	European Standards