Search results for: 'self front system steel 5 unit selector 1 a'

White painted tube-section aluminum boom, with groove covering profile. Ø 100 mm, boom length: 2-6 m.

Sensitive safety edge made of rubber, with mechanical contact.L = 1,700 mm.

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

MTM Standard with Agata Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM VR ZAMAK Vandal Resistant, Audio Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM Standard with Perla Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

A.Gtag   Unique ID vehicle tag 

The Gtag is a plug in USB device that transmits a unique ID to a receiver A.R22 in the access control system. Each receiver can save 340 Gtag's.

MTM Standard with Opale Monitor Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

MTM VR ZAMAK GSM Audio Vandal resistant GSM Kit, surface or flush mounting, 1-10buttons, with or without keypad, with or without proximity reading. 

Adapter arm for partially protruding overhead garage doors

MTM Standard with XTS7 Monitor IP Video Kit, 1-10buttons, with or without keypad, with or without proximity reading. 

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

AGT is the handset intercom characterized by the essential lines and ergonomic handset with magnetic hang-up that eliminates the risk of falling or incomplete contact.
Soft touch buttons for the X1 version, traditional mechanical buttons in the 200 version, with white indicator LEDs. In the EVO version, up to 6 intercom calls can be programmed.

LB180 is an interface circuit board to connect two batteries to a ZLJ24 control panel. The LB180 will keep the batteries charged while mains power is applied. It will switch over to the batteries when the mains power fails. 

LB180 takes two 12V batteries. The battery size depends on the anticipated use while running on battery, and the overall time the power is off. In UK, we can expect power outages to be about 10 minutes, but recent storms have seen several days outage.

Support for fitting DIR-series photocells.

RIA043 - Gate Hooking Bracket

External key switch with blue backlight and DIN lock cylinder.

FROG-PM6  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 7 m leaves that weighs up to 550kg.

CAME Connect	European Standards	Encoder Motor

FROG-PM4  Irreversible underground 230 V gearmotor with adjustable leaf-closing for swing gates with up to 5.5m leaves that weighs up to 700kg.

CAME Connect	European Standards	Encoder Motor

The VD959 'Dynamite' Adjustable vehicle loop detector is an absolute favorite for an EXIT sensor / Loop detector that requires no loops to be cut and is self setting, so takes a quarter of the time to install than the traditional loop detectors.