Search results for: 'taxable remote 0'

DLX30CEP is Came's latest traditional square surface photobeam. It replaced DELTA-E and DOC-E. 

DLX30CIP is Came's latest traditional square flush photobeam. It replaced DELTA-I and DOC-I. 

CGZP Module 4 rack made of 10 x 10 mm nylon, 1m

Yellow luminous cord with white LEDs.

88001-0144 - Lower, Upper Stem Shell AXO3/4

88001-0145 - Lower, Upper Stem Shell AXO5/7

Reinforcement for the clamp-end. Essential for passage clearances of over 4 m.

Reinforcement for the clamp-end. Essential for passage clearances of over 4 m.

Barrier arm for G4000 cabinets, white 60mm diameter. Fits the G0405 arm clamp. The G0461 reflective strips are recommended.

R700 plugs into recent PCB's to interface card reader selectors to the control panel.

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

DOC-E Surface fitting safety photocells 20m range ~ Replaced With The DLX30CEP

DLX30CEP - Direct Replacement

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 10 m

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 30 m

Pair of surface mounted infrared-beam photocells rated at 12 - 24 V AC - DC. Range: 20 m

Inner reinforcement for semi-oval section barrier; indispensable for gross clearances exceeding 2.5 m.

Balancing springs for CAME barriers.

DOC-I Flush fitting safety or free exit photocells 20m range. ~ Replaced With The DLX30CIP

DLX30CIP - Direct Replacement

G4000 are issued with the arm clamp for a rectangular arm. This G0405 is required for fitting a 60mm diameter tubular arm.

Control board for decoding and access-control management via keypad selectors. R800 plugs into recent control panels.