Search results for: 'sensor post'

Tip support post for fixing to a barrier arm where a fixed tip support post is not suitable.

Learn More

Standard height tip support issued with G4000, G5000, and G6000 barrier sets

Learn More

VD908  Adjustable mini-loop exit sensor

Specification: 19mm diameter sensor 22m cable length 8-40V dc  or 8-28V ac Iq = 1.6mA, Idetect = 30mA Module size 25 x 39 x 52mm (excl conn) Environmental rating – IP65 1A @ 30Vdc volt free contacts Operating temp -35° C to 74° C

New mini-loop kit with adjustable sensitivity module and new probe 

Learn More

The VD961A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Learn More

The VD963A, known as the Magna Sensor, is of a new generation of electronic sensors which do the job of a loop detector, except better and more reliably. The Magna sensor recognizes vehicles by the ferrous content of the car. Unlike ordinary loop detectors, the sensor adjusts for most drainage and access covers.

Learn More

Intercom video modules for XIP systems.Electronic module with techno-polymer body and 2 call buttons with double, blue or white, namecard backlighting. PAL/NTSC 680x512 resolution video camera sensor with built-in microprocessor for digital signal processing. Wide-eye lens with 100° horizontal and 82° vertical opening and digital zoom adjustment.

Learn More

Intercom video modules for IP360 systems.Electronic module with techno-polymer body and 2 call buttons with double, blue or white, namecard backlighting. Video camera sensor with HD 1280x720 resolution and HDR technology, plus built-in microprocessor for digital signal processing. Ultra wide-eye grand angle lens with 130° horizontal and 95° vertical opening and digital zoom adjustment. 

 

Learn More

Intercom video modules for X1 systems.Electronic module with techno-polymer body and 2 call buttons with double, blue or white, namecard backlighting. PAL/NTSC video camera sensor with 680x512 pixel resolution and built-in microprocessor for digital signal processing. Wide-eye lens with 100° horizontal and 82° vertical opening and digital zoom adjustment. 

 

Learn More

Automatic barrier kit using the legacy barrier cabinet on openings up to 5m. The cabinet includes a 24Vdc gearmotor with encoder.  The cabinet is galvanised steel in a grey finish. The set comes with a tubular arm with tip support post and reflective strips. Specify left or right hand.

Learn More

VY280t   Locking doo magnet with timer

Functions: 280kg holding force Dual voltage 0, 3, 6, or 9s delay on timer Monitored with LED Aluminium base plate

Technical features: 12-24V dc  Form C monitor relay 1A @ 12V 250 x 42 x 26mm

Learn More

Reads cards and tags on Manchester protocol, such as Came TST01, TAG, or PCT. The selector sends the data to a control panel or card processor. Both processing device will need a R700 card to comunicate with the reader. The selector does not store any data, so data cannot be stollen with the reader, the reader can be changed without loosing data, and the gate cannot be activated from the wires to the reader.

There is a blue backlight behind the sensitive area. 

Flush mount SEL options can be fitted in the CSS or CSSN posts.

Click here to view SELR1BDG manual

Learn More

VY350w    Waterproof locking gate magnet

Functions: 350kg holding force Dual coil, dual voltage Stainless steel housing Side fix to aluminium chassis

Technical features: 12Vdc 450mA, or 24Vdc 225mA 228 x 47 x 29mm

Learn More

VY500f   Waterproof gate locking magnet

Functions: 500kg holding force Dual coil, dual voltage Stainless steel housing Face fix to gate

Technical features: 12Vdc 480mA, or 24Vdc 240mA 222 x 62 x 38mm

Learn More

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 1.8m	Max Weight: 100Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a single swing gate weighing up to 100 kg / max width 1.8 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 1.8m	Max Weight: 100Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a pair of swing gates weighing up to 100 kg per leaf / max width 1.8 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 1.8m	Max Weight: 100Kg

 

CAME Connect	European Standards

Learn More

Complete kit for a single swing gate weighing up to 100 kg / max width 1.8 m

Motor Features: Encoder	Motor Voltage: 24v
Max Length: 1.8m	Max Weight: 100Kg

 

CAME Connect	European Standards

Learn More

The VD955 can be used as either a safety loop or free exit probe detector. It should not be used as a safety loop if used with a Free Exit Probe. 

The VD955 includes a VD.CI Interface board, to work with most gate automation control panels.

• 10-30V ac/dc
• Selectable for full loop or exit sensor
• Selectable fail safe (presence) or fail secure (exit)
• 10 sensitivities
• 4 frequencies
• Contact closure/opening time delay

Learn More

FA.T80   CoBRA programmable beam

Specification: 7 fixed ranges plus full adjustment 10-30V dc   10-24V ac Iq = 65mA, Idetect = 28mA Dimensions 37 x 36 x 108mm Environmental rating – IP65 0.8A @ 30Vdc volt free N/O or N/C Operating temp -10° C to 60° C

Programmable range photobeam, one side only. Set range on DIP switches, or fully adjustable. 

Learn More

Post with counter-weight and chain latch. for: CAT-X – CAT-X24 - CAT-X110 - CAT-X24110 Learn More